1
2
3
AngelTrax
| 23
Vehicle ID Type and Number
1. Select Sub Menu from the Main Menu using the arrow
buttons on the remote (see Figure 1), and press ENTER.
At the Sub Menu, use the arrow buttons on the remote to
navigate to the DVR ID menu (see Figure 2), and
press ENTER.
2. At the DVR ID menu, you will have the following options:
ID Type and ID (see Figure 3).
3. Select ID Type and press the plus or minus button on the
remote to scroll through the options. These options include:
Bus, ID, Train and Taxi. Select the desired option and
press ENTER.
4. Select the ID option using the arrow buttons on the remote.
Edit each digit by pressing the plus or minus buttons on the
remote. There are eight digits, and available options are A
through Z and zero through nine for each digit.
5. After setting adjustments have been made, press the Menu
button on the remote to save your changes and return to the
Sub Menu. Press Menu again to return to the Main Menu.
Press Menu again if you wish to return to the live
camera view.
NOTICE - CHANGING VEHICLE
ID TYPE:
When the vehicle type is changed, the signal wire
labels will change. Please refer to the Driver Action-
detecting per Vehicle Table, page 13
,
for
more information.