1
2
3
4
AngelTrax
| 24
Formatting the HDD (CF Card)
1. To format the CF card, use the arrow buttons on the remote
to select HDD Setup from the Main Menu (see Figure 1),
and press ENTER.
2. From the HDD Setup menu, use the arrow buttons to select
HDD Format (see Figure 2), and press ENTER.
3. At the HDD Format menu, use the arrow buttons to scroll
down to the Run option (located beside the Confirm option -
see Figure 3). Press ENTER on the remote to select the
Run option.
4. At the bottom of the HDD Format screen, a Format message
will appear to show that formatting is in progress (see
Figure 3). After the CF card is formatted, a Format OK
message will appear at the bottom of the HDD Format
screen (see Figure 4). The CF card is now reset and enabled
for recording.
5. The system will return to live camera view, and record
(REC) mode.