1
2
A/V Output on MDVR
A/V Opening on Door
ATCF
460
AngelTrax
| 19
Using the ATCF460 Menu
To begin setup of your DVR, follow the user guide
referenced below:
1. Power up the DVR by turning on the vehicle’s ignition.
2. Remove the plastic insert in the battery compartment of the
supplied DVR remote.
3. Connect your portable monitor to the composite A/V output
on the front of the DVR using the supplied cables (see
Figure 1).
4. You should now see a live view of your cameras. Please
refer to the On-Screen Display Diagram, page 17, for an
explanation of live camera view features (see Figure 2).
ATCF460 DVRs are equipped with a user menu section designed for the customization of your system. However, there are a few settings
that must be set for the MDVR to function properly, including: Date and Time, Vehicle I.D., Vehicle I.D. Number and Formatting the
CF card.
