- 14 -
C
1
3
9
6
040
00
.f
m
%NGLISH
)4
'"
$%
&2
%3
If the safety thermostat is tripped, the appliance has
to be restored to working conditions as follows.
1 - Allow the oil to cool to 30-40°C.
2 - Press the button (
A
) of the safety thermostat to
restore the electricity supply.
Important
Before it is put into service, the system
must be tested to check the operating
conditions of every single component
and identify any malfunctions. In this
stage, it is important to check that all
health and safety requirements have been
complied with in full.
To test the system, make the following checks:
1 - check that the mains voltage is the same as that
of the appliance;
2 - operate the appliance's circuit-breaker to check
the electrical connection;
3 - check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
The appliance's main functions do not require any
special adjustments by specialist staff except the
settings made during use by the user.
The appliance does not require the replacement of
operating components by specialist staff except the
replacement of standard parts which can be carried
out by the user.
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work.
Never dump non-biodegradable materials,
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
RESETTING THE APPLIANCE
TESTING OF THE APPLIANCE
ADJUSTMENTS
8
REPLACING PARTS
9
DECOMMISSIONING THE APPLIANCE
A
A
IDM-39604006900.tif
