Andor Technology Zyla sCMOS 4.2 PLUS Скачать руководство пользователя страница 7

Страница: 7 / 78

version 2.0 rev 18 Feb 2021

Revision History

Version

Released

Description

1.0

17 Jul 2012

Initial Release

1.1

29 Oct 2012

General minor updates throughout.

1.2

15 Oct 2013

General enhancements to presentation (all Sections)

Text revised to improve clarity of information (all Sections.

Zyla Components revised to show standard supplied components more clearly (Section 1.5)

Additional accessories revised to match current options available (Section 1.5.1)

Additional information added for use for lens mount adaptors (Section 4.2)

Updated timing diagrams and tables for Rolling and Global Shutter Modes (Section 2)

Updated to show 12-bit data range and gain channels options (Sections 2.6 and 2.7)

1.3

16 Jan 2014

Added Information to support the Zyla 4.2 model (all Sections).

Added Rolling Shutter Global Clear modes (Section 2.6)

Timing data updated to align with current data (Section 2.6)

1.4

13 Feb 2014

Information added for Water Cooled Zyla models (all Sections).

Further information on frame rate performance for each model under different shutter and ROI

modes added (Section 2.5)

1.5

09 Jun 2014

Updates to include support for Zyla USB 3.0 model (All Sections)

Added new section to cover disabling USB host controller power management (Section 3.7.1)

Updated frame rates table for USB 3.0 models (Section 2.5)

Updated presentation throughout to match current company branding

Updated Figures 4 (Section 1.6.4), 7( Section 2.1) and 12 (Section 2.4) to enhance quality

Included updates to show support for Windows 8 (Sections 3.4 and 3.7)

1.6

15 Sep 2014

Updated accessories list to show that longer lengths of USB 3.0 cable are available, but not sup-

plied or verified by Andor (Section 1.5.1)

1.7

03 Feb 2015

Updated information for Zyla 5.5 model: low vibration fan (as used in Zyla 4.2) fitted to air-cooled

units from February 2015 onwards, max. Ambient temperature changed to 30

Edited Mechanical drawing for water cooled models to show distance from C-mount to camera

faceplate when installed is 6mm nominal.

1.8

17 Nov 2015

Revised Rolling Shutter Sections (Section 2.6.2.3 to 2.6.3.12)

Corrected cross-reference to Mechanical Drawings (Section 3.2)

Mechanical drawings updated (Appendix A)

1.9

01 Feb 2016

Updated PCI slot for USB Card to x4 or greater- previously was x4 only (Sections 3.4 and 3.6).

1.10

19 May 2016

Added BIOS options checking and setting for Camera Link models used with non-Andor supplied

PCs (Section 3.8).

1.11

10 Jun 2016

Added note regarding a potential loss of performance in an ESD strike event (Safety and Warning

Section)

1.12

12 Sep 2017

Expanded cooling information for water cooled models (Section 3.3, Appendix B)

Added Emergency power off section (Section 4.5)

Updated software, PCIe cards and PC requirements to current spec.
Added part numbers for power connector and socket (Section 1.6.5)

1.13

11 Apr 2019

Updated USA and Asia-Pacific addresses (page 9) and front cover.

1.14

13 Jun 2019

Updated mechanical drawings of back view of USB3, water cooled and Camera Link Zyla vari-

ants (Appendix A). Updated back view images of Zyla (Section 1.6.2). Minor updates to format

throughout.

1.15

16 Apr 2020

Updated China office address, updated front cover.

2.0

18 Feb 2021

Added new sections 2.7.7 LightScan PLUS, 5.4 Zyla Chamber Design, Service Guidance and 6.9

Condensation Effect Noticeable in Images. Added Appendix A with technical, general,

environmental, and power specifications. Updated branding throughout.

Updates to the Manual

Changes are periodically made to the product and these will be incorporated into new editions of the manual.
Please check for new releases of the manual at:

andor.oxinst.com/downloads

. If you find an issue in this manual

please contact your customer support respresentative (Section 1.1) with a description of the issue.

Содержание Zyla sCMOS 4.2 PLUS















































































Результаты поиска

Содержание Zyla sCMOS 4.2 PLUS

Отзывы:

Бренды по названию

Популярные бренды

Andor Technology Zyla sCMOS 4.2 PLUS, Руководство по оборудованию

Результаты поиска

Содержание Zyla sCMOS 4.2 PLUS

Отзывы:

Бренды по названию

Популярные бренды