AND UA-1020-W, Инструкция по эксплуатации

Страница: 20 / 292

English 18
Recalling the Memory Data
Note: This device stores the last ninety sets of data in memory automatically.
1. Press the
or button.
The average of all measurements and
the number of data are displayed.
(If no data, “0” is displayed. Press the
, or START button to turn the
device off.)
2. Each time the button (or the
button to display the data in the
reverse order) is pressed, the memory
data is displayed as follows.
Average of all AM (morning) measurements
taken between 4:00 and 9:59.
(In the example, 10 measurements. If
no data, “--” is displayed.)
Average of all PM (evening) measurements
taken between 18:00 and 1:59.
(In the example, 9 measurements. If
no data, “--” is displayed.)
Most recent data (No.n, in the
example, No.35)
Three seconds after the data number
display, the measurement data is displayed.
Last data (No.1)
Three seconds after the data number
display, the measurement data is
displayed.
3. After the last data is displayed, press
the button to return the average
display of all measurements.
4. Press the START button to turn the
device off. After one minute of
non-operation, the device will turn off
automatically.
Average of
all the data
Average systolic
Average diastolic
Average pulse
Press or
Most recent data
Systolic
Diastolic
Pulse
Last data (Oldest)
Average
of AM data
Average
of PM data
Average systolic
Average diastolic
Average pulse
Average systolic
Average diastolic
Average pulse
Systolic
Diastolic
Pulse