AND UA-1020-W, Инструкция по эксплуатации

Страница: 12 / 292

English 10
Press
Turn off
Year
Month
Day
Hour
Minute
Pressure
setting mode
or
or
or
or
or
Using the Monitor
Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press the SET button until the year starts
blinking.
2. Select the year using the or button.
Press the SET button to set the current year
and move to month/day selection. The date
can be set anywhere between the years 2010
and 2059.
3. Select the month using the or button.
Press the SET button to set the current
month and move to day selection.
4. Select the day using the or button.
Press the SET button to set the current day
and move to hour/minute selection.
5. Select the hour using the or button.
Press the SET button to set the current hour
and move to minute selection.
6. Select the minute using the or button.
(Press the SET button to go to the pressure
setting mode. For details, refer to page 15.)
Press the START button to turn the device off.
Note: After three minutes of non-operation, the device
will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
Holding down the or button
will change the value continuously.
Pressing the START
button will turn the
device off anytime.