AND HT-3000CL, Инструкция по эксплуатации

Страница: 4 / 20

4
PARTS DESCRIPTION
ON:OFF key Turns the scale power on/off.
RE-ZERO key
Sets the display to zero. When the weight is within
±2% of the weighing capacity to the zero point at the
power-on, the key will zero the scale. When the weight
e2%, it will be subtracted as tare weight.
MODE key
Changes the weighing units.
ENTER key
Used for setting the upper and lower limit value for
the comparator.
Comparator Shows results using LO, OK or HI (red, green and
yellow) after comparing the weighing value to the
upper and lower limit value.
STABLE indicator Turns on when the weight reading is stable.
Polarity Shows the polarity of the weighing value.
NET indicator Turns on when the net weight is displayed.
ZERO indicator
Turns on at the center of zero point. At the net weight
zero point, both the ZERO and NET turn on.
Battery indicator
Shows the remaining battery level in 3 steps when
operated by batteries.
Battery cover
(on the bottom)
Weighing pan
ON:OFF key
MODE key
RE-ZERO key
Calibration
switch cover
Display
ENTER key
Color bar
Comparator
STABLE indicator
Polarity
ZERO indicator
Weighing units
Battery indicator
NET indicator