AND HT-3000CL, Инструкция по эксплуатации

Страница: 9 / 20

9
Confirming the second upper and lower limit value
Setting the Upper and Lower Limit Value

When the key lock function active, these operations cannot be used
.
4. Press the MODE key to display the memory number to be set.
5. Press the RE-ZERO key to display the lower limit value.
6. Press the ENTER key at the lower limit value display to make LO and a
digit of the value blink.
7. Set the lower limit value by using the following keys.
MODE
：
To change which digit is blinking.
RE-ZERO
：
To increase by +1 the value of the blinking digit.
RE-ZERO (Press and hold)
：
To toggle between plus and minus.
8. Press the ENTER key to store the lower limit value. The scale then
displays the upper limit value after displaying
end
.
9. Press the ENTER key at upper limit value display to make HI and a digit
of the value blink.
10. Set the upper limit value by using the following keys.
MODE
：
To change which digit is blinking.
RE-ZERO
：
To increase by +1 the value of the blinking digit.
RE-ZERO (Press and hold)
：
To toggle between plus and minus.
11. Press the ENTER key to store the upper limit value. The scale then
retunes to the memory number display.
12. To return to weighing mode, press the ENTER key. (Start comparing
using memory number displayed at this time.)
Memory number
display
Lower limit Upper limit
Start comparing using the
second memory.