background image

 

2

SAFETY PRECAUTIONS

 

All safety messages are identified by the following, "

WARNING

" or 

"

CAUTION

", of ANSI Z535.4 

(American National Standard Institute: Product 

Safety Signs and Labels)

. The meanings are as follows: 

 
 
 
 
 



This manual is subject to change without notice at any time to improve 
the product. 



Product specifications are subject to change without any obligation on 
the part of the manufacture. 



When using the scale, the following safety precautions should always 
be followed. 

 

WARNING 

Repairs  

Do not disassemble the scale. Contact your local A&D dealer if your 
balance needs service or repair.   

 

Troubleshooting  

If a problem has occurred and you cannot clear it, stop using the scale, 
place a notice on the scale and request service from the store where 
you purchased the balance or from your local A&D dealer.   

 

CAUTION 

Conditions for Use and Ambient Temperature   



The scale is a precision instrument. Avoid installing the scale in direct 
sunlight, excessive dust, high humidity, high temperature, large temperature 
fluctuations or magnetic fields, which may cause problems or malfunctions. 



Drafts and vibration may cause excessive weighing errors. 



Use the scale range of the -10°C to 40°C, with less than 85% R.H. 

 

Operation  



Avoid mechanical shock to the scale, especially to the weighing pan. 
That could cause damage. 



Avoid overloading that could cause damage to the scale. 



The scale is not waterproof type. Water invading into the scale may 
cause damage. 



If the scale is not to be used for a long period of time, remove all 
batteries from the battery compartment to avoid battery leakage. 



Do not mix batteries made by different manufactures, or mix old and 
new batteries. Replace all of the batteries at one time. 



Use only the specified AC adapter for the scale (AC adapter is optional). 

WARNING

 

A potentially hazardous situation which, if not 
avoided, could result in death or serious injury. 

CAUTION

 

A potentially hazardous situation which, if not 
avoided, may result in minor or moderate injury. 

Содержание HT-3000CL





















Отзывы: