AND HT-3000CL, Инструкция по эксплуатации

Страница: 11 / 20

11
Items that include a “
○
” mark are currently set values.
If the RE-ZERO key is pressed when a function settings item is being
displayed, the setting values can be changed.
To store setting value changes (at a setting display with the “
○
” mark
turned off), press the MODE key. After
end
is displayed, the next item
will be displayed.
Setting the Weighing Units to Use

The scale has the weighing units listed in the table below and the units to
be used only can be selected. Set the weighing units enabled or disabled
as appropriate.

There are three types of taels, HK general/Singapore tael, HK jewelry tael
and Taiwan tael. But one of them can be selected.

The order of units to be displayed is as in the table and it cannot be
changed.
・
Display Unit .
・
Press the RE-ZERO key to proceed to weighing unit selection settings
.
MODE
：
To select weighing units to be set.
RE-ZERO
：
To enable or disable the units displayed.
Units that include a “
○
” mark are units to be used.
Example) "g" is available.
"g" is unavailable.
・
By repeatedly pressing the MODE key, the device stores weighing units
to be used after displaying end , and then it returns to a function
setting item.