Analytik Jena aj CYBERTRON InnuPure C12, Руководство пользователя

Страница: 9 / 47

Safety Instructions
General warning information
InnuPure C12 Issue 01/2011 7
Before another cleaning or decontamination procedure is used as that
prescribed by the manufacturer, the user shall check with the manufacturer that
the intended procedure will not damage the device.
Transportation!
In case of transportation only use the provided packaging and follow the
packaging instruction strictly. The weight of the InnuPure C12 is approx.
28.5 kg. Thus never bear up the device alone!
Before transportation remove all samples, reagents and the sample tray out of
the device.
No operation in areas subject to a risk of explosion!
Heat build-up
A heat build-up can cause overheating and faults in the device.
Ensure that the ventilation slits on the InnuPure C12 are kept free at all times!
Water
Ensure that no liquid can enter the InnuPure C12.
The device could be damaged.
Do not place any containers with liquids on the device!
Corrosion risk
Do not place the device in the immediate vicinity of aggressive vapours, e.g.
strongly corrosive acid or alkali vapours. The vapours could corrode the
connections and mechanical parts of the device.
Danger of tilting the InnuPure C12
The components of InnuPure C12 are connected with the interfaces of the
device via plug connections. In case of tilting device the disconnection of a
component could take place and the proper function of device can't be
guaranteed.
Device could be damaged!
Caution!
Do not run the InnuPure C12 with open front door! The door should be only
opened in case of any cleaning purpose!
Nickel allergy!
The sample tray is coated by nickel.