Analytik Jena aj CYBERTRON InnuPure C12, Руководство пользователя

Страница: 15 / 47

Installation, transport, storage conditions
InnuPure C12 Issue 01/2011 13
4 Installation, transport, storage conditions
Installation conditions
Attention! Observe the following installation conditions under all
circumstances!
Keep the ventilation slits on the back side of device free!
Do not place any objects on the device!
No operation in areas subject to a risk of explosion!
No aggressive vapours, e.g. highly corrosive acids or alkalis in the immediate
vicinity of the device.
The installation site must satisfy the following conditions:
• The InnuPure C12 site of operation must be free of draughts, dust,
corrosive vapours and vibrations.
• Do not install the InnuPure C12 in the vicinity of electromagnetic
fields (e.g. motors).
• Avoid water drips, splashes and spray close to the InnuPure C12.
• Do not expose the InnuPure C12 to direct sunlight or radiation from
heaters.
• Temperature range in operation: + 5 ... + 40 °C
• Humidity in operation: up to 80 % (at + 30 °C)
Place requirements
The dimensions of the InnuPure C12 are displayed in the following:
• Closed device (W x D x H): 380 mm x 530 mm x 370 mm
• With open front door (W x D x H): 380 mm x 920 mm x 370 mm
• Sample tray (W x D X H): 200 mm x 250 mm x 23 mm
• Priming station (W x D x H): 210 mm x 260 mm x 160 mm
The pre-loaded tray has to be moved to the device via the front slit. Additional
the door of the InnuPure C 12 must be opened for cleaning purposes (

"Cleaning" p. 37) and has to be added to the dimensions of the device.
The shortest distance between the ventilation slits and the nearest object is 50
cm to guarantee the air exchange of device and environment. Do not place
device on a soft surface.