Analytik Jena aj CYBERTRON InnuPure C12, Руководство пользователя

Страница: 25 / 47

Operation
InnuPure C12 tools
InnuPure C12 Issue 01/2011 23
7.3 InnuPure C12 tools
The following options are available in the InnuPure C12 tools:
Init Initialization of the device, whereby
the axes and sample tray are moved
to the starting position.
Waste tips Moving of tip on the tips admission to
the waste box.
Tray out The sample tray is moved out of the
device
Magnet out The bar magnets are moved out of
the tip admission for any cleaning
purpose
7.3.1 Initialization
Attention!
After switching on the InnuPure C12 is initialized automatically.
Follow the steps, which are described in the following:
1. Switch on the InnuPure C12 on the rear panel of
the device ( → "Construction and connections"
p. 8).
The device is now initialized automatically.
2. Wait until a beep is audible and the start screen
appears, before starting any isolation protocol!
If a manual initialization will be necessary, follow the next steps:
Before an initialization can be started the sample tray has to be pushed to the
device, so that the positions of the Elution Tubes are in the front of the device
( → "Position of the sample tray" p. 18). The tray has to be moved into the
InnuPure C12 until perceiving a slight resistance. On pressing against this
resistance the tray is moved in automatically.
1. Enter the start screen by pressing [ESC/Stop] ( →
"Keypad functions" p. 9).
2. Put the sample tray to the InnuPure C12