Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
TETRA VIO
4-5. FUNCTIONS DESCRIPTION
[INPUT]
[Input status]
Indicates the status of the selected input.
[Auto settings]
This function detects automatically the input type of the source connected to the input connectors (DVI & RGB).
Then the device performs an auto-centering function.
[Input ---]
Input type selection. Select an input then make the following adjustment:
[Input type]
: Select the type of the source connected to the corresponding input between:
•
[SDTV Composite]
•
[SDTV Y/C]
•
[SDTV YUV]
•
[Video RGBS]
•
[Video RGsB]
•
[Computer HV/C]
•
[Computer SOG]
•
[Computer B&W]
•
[DVI video RGB]
•
[DVI video YUV]
•
[DVI Comp 0-255]
•
[DVI Comp 16-235]
•
[SDI video]
NOTE:
For
[SDTV Composite]
and
[SDTV Y/C]
, select the video standard
between:
•
[Auto]
: automatic NTSC, PAL and SECAM standard detection.
•
[NTSC]
: NTSC standard detection only.
•
[PAL]
: PAL standard detection only.
•
[SECAM]
: SECAM standard detection only.
•
[B & W 50/60 Hz]
: Black and White detection.
[H sync load]
H Sync. input load selection.
[Audio input]
This function allows to assign the needed Audio input channel to the selected Input---. Select the
corresponding audio input.
[Analog A]
[Analog B]
[Analog C]
[Analog Front]
[SPDIF]
[Embedded SDI]
PAGE 22
