TETRA VIO
Chapter 5 : UPDATING THE DEVICE
The TETRA VIO can be updated using a computer (PC) via its RS-232 communication port or via its LAN communication
port.
5-1. UPDATE SOFTWARE INSTALLATION
Download the Tetra Vio Updater available on our Web site
http://www.analogway.com
Copy the file (eg: TetraVIO_UP_V0201900.exe) onto the computer used for the RS232 and execute it. Then follow
the installation instruction (don’t forget to accept the license agreement).
5-2. DEVICES CONNECTIONS
Connect the device to an AC power outlet.
Switch ON the device (REAR PANEL SWITCH = I).
Connect the device to the computer used for the update via the desired communication port.
•
For the RS232 communication port: Connect the RS232 connector of the device to the serial port of your computer
with a DB9 M/F straight cable. Then with the front panel display menu activate the RS232 communication port
(
CONTROL > RS232/LAN > RS232
).
•
For the LAN communication port: Connect the RJ45 connector of the device to your network according to your
installation. Then with the front panel display menu configure the LAN communication port (
CONTROL > LAN
setup
) and activate the LAN communication port (
CONTROL > RS232/LAN > LAN
).
5-3. UPDATE INSTRUCTIONS
Open the file: Tetra VIO Up.exe (in
Start > Program > ANALOGWAY > Tetra VIO updater
).
In the
Port
menu select the
Setup
then select the
Connection type
(RS232, UDP or TCP) and select the
communication parameters.
Click on
START
on the software. The update will start.
When the software displays:
Program operation completed
, click on the
Quit
button to close the update software.
Your TETRA VIO is now ready to work.
PAGE 27
