TETRA VIO
Chapter 6 : REMOTE CONTROL SOFTWARE (continued)
6-3. COMMUNICATION SETUP (continued)
•
CASE OF LAN PORT:
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(
CONTROL > LAN setup
), then activate the LAN communication port (
CONTROL > RS232/LAN > LAN
).
- With the
Controls
menu of the software, select
RS232/LAN setup
. Then in the
Connection Configuration
window select the UDP or TCP protocol and select the needed parameters. The software will also display
Device
connected
.
NOTE
: To verify the LAN status of your device: Select
LAN status
in the
Controls
menu.
6-4. USING THE SOFTWARE
Click on the
Input
button and select the
Signal
Type
for each input.
Then make the others adjustments
(H sync
load, Audio...)
.
Click on the
Output
button and select the Output format and output rate.
Then make the others needed adjustments
.
PAGE 29
