Chapter 1 : INTRODUCTION (continued)
TETRA VIO
1-2. GENERAL INFORMATION (continued)
Tetra-VIO
is a universal device with six functions in one: Scan Converter, Scaler, Standard converter with TBC,
Audio De/Embedder, Switcher and Interface. Its high flexibility makes it essential in complex installations. It is
extremely useful in solving signal compatibility issues at the last minute. In addition to a powerful multi-format
Converter, Tetra-VIO is also a smooth and fast Audio / Video Switcher offering many useful possibilities such as
500% Zoom, user programmable EDID for DVI input, etc… The standard RS232 connection and GUI allow a full
remote control of the device and also upgrade capability to maintain the high value of your equipment. Optional
RJ45 is available for TCP/IP control.
Tetra-VIO
is your accurate “all in one” Versatile Input/Output tool.
1-3. DEVICES & OPTIONS REFERENCES
REFERENCE
DESIGNATION
TVC401
TETRA VIO
OPT-LAN
LAN communication port (optional).
1-4. INSTALLATION
IMPORTANT:
Please read all the safety instructions (pages 2 to 4) before starting.
•
Table Top Mounting:
The device can be used directly on a table: the unit is equipped with 4 plastic feet.
•
Rack Mounting:
The device is compatible with a 19" enclosure. To install the device into a 19” rack: Attach the
device to the rack by using 4 screws in the front panel holes (screws are not included). Connect
all of the cables to the device and attach them to the rack with some tie wraps.
IMPORTANT:
•
The openings in the rear and side panels are for cooling. Do not cover these openings.
•
Be sure that no weight is added to the device
in excess of 2 kg (4.4 lbs.).
•
The maximum ambient operating temperature must not exceed 40°C (104°F).
•
The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.
PAGE 8
