Chapter 2 : STARTING (continued)
TETRA VIO
2-2. INPUT #1 DESCRIPTION
CONNECTION:
You can connect to this input one of the following source:
•
A composite video source on the
Y
BNC connector or on the
COMPUTER/TV/HDTV
HD15 (bottom)
connector.
•
A S.VIDEO source on the
Y
and
Cr
BNC connectors or on the
COMPUTER/TV/HDTV
HD15 (bottom)
connector.
•
A Component video source (YCrCb or HD-YCrCb) on the
Cr, Y
and
Cb
BNC connectors or on the
COMPUTER/TV/HDTV
HD15 (bottom) connector.
•
A RGBS source on the
R, G, B
and
S
BNC connectors or on the
COMPUTER/TV/HDTV
HD15 (bottom)
connector.
•
An analog (RGBHV, RGsB, RGBS) computer source on the HD15
COMPUTER/TV/HDTV
(bottom) connector.
LOOP OUT:
You can connect a control monitor to the HD15 (LOOP OUT) connector. This connector can be used as well with
analog sources connected to the BNC inputs.
INPUT #1 CONNECTION DIAGRAM:
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
VIDEO RGB/S
YUV & HDTV (analog)
S.VIDEO (Y/C)
COMPOSITE VIDEO
PIN 1
RED.
RED.
Cr / Pr.
C (chrominance).
PIN 2
GREEN.
GREEN.
Y.
Y (luminance).
VIDEO (NTSC, PAL...)
PIN 3
BLUE.
BLUE.
Cb / Pb.
PIN 6
RED return.
RED return.
Cr / Pr return.
C return.
PIN 7
GREEN return.
GREEN return.
Y return.
Y return.
return.
PIN 8
BLUE return.
BLUE return.
Cb / Pb return.
PIN 10
GND.
GND.
PIN 13
H sync or C sync (S).
C sync (S).
PIN 14
V sync.
HD15 female connector of the device.
5
6
1
15
10
11
PAGE 12
