Chapter 10 : RS-232 PROGRAMMER'S GUIDE SMART CUT 2™
PAGE 36
10-5. COMMANDS DESCRIPTION (continued)
•
P command
returns the Computer status. (RESPONSE : CSTA--).
Bit 4
(16)
Bit 3
(8)
Bit 2
(4)
Bit 1
(2)
Bit 0
(1)
0 = No sync. detected.
1 = Sync. detected.
0 = H & V sync. detected.
1 = COMP sync. detected.
0 = Non interlaced format.
1 = Interlaced format.
0 = Computer sync are not used as ref. sync.
1 = Computer sync are used as ref. sync.
0 = Computer format out of range (for reference sync.)
1 = Computer format in range (can be used as reference sync.)
•
c command
is used to know the computer number which status is displayed.
- SMART CUT 2
™
ALONE APPLICATION.
DECIMAL
VALUE
SELECTION
RESPONSE
APPLICATION
0
NO COMPUTER
CCHAN0
1
COMPUTER 1
CCHAN1
S-CUT 2 ALONE
2
COMPUTER 2
CCHAN2
- SMART CUT 2
™
+ SMART SWITCH VIDEO
™
APPLICATION.
DECIMAL
VALUE
SELECTION
RESPONSE
APPLICATION
0
NO COMPUTER
CCHAN0
2
EXTEND PC 2
CCHAN2
S-CUT 2
23
COMPUTER 1
CCHAN23
+
24
COMPUTER 2
CCHAN24
SMV415
25
COMPUTER 3
CCHAN25
