Analog way S-CUT2, Руководство пользователя

Страница: 34 / 75

Chapter 10 : RS-232 PROGRAMMER'S GUIDE SMART CUT 2™
PAGE 34
10-5. COMMANDS DESCRIPTION (continued)
e IMAGE COMMANDS
The following commands are active only on the selected (displayed) video input.
They are not active for the COMPUTER input.
•
H, V, W, S, B, C, s, T, commands are used to control the output adjustments.
0 = minimum
255 = maximum
•
f command is used to select the image process.
- SMART CUT 2
™
WITH OR WITHOUT SMART SWITCH VIDEO
™
APPLICATION.
DECIMAL
VALUE
SELECTION (IMAGE PROCESS) RESPONSE APPLICATION
0 NO PROCESS SHARP0
1 SHARPNESS 1 SHARP1
2 SHARPNESS 2 SHARP2
3 SHARPNESS 3 SHARP3 ALL
4 GAMMA 1 SHARP4
5 GAMMA 2 SHARP5
6 SHARPNESS 1 + GAMMA 1 SHARP6
7 SHARPNESS 2 + GAMMA 1 SHARP7
•
b command is used to select the video input's aspect ratio.
DECIMAL
VALUE
SELECTION OF ASPECT RATIO RESPONSE APPLICATION
0 4/3 IASP0
1 14/9 IASP1 ALL
2 16/9 IASP2
f AUDIO COMMANDS
•
M, a commands are used to control the audio adjustments (MASTER VOLUME & AUDIO LEVEL).
0 = minimum
255 = maximum
•
A command is used to select the audio channel.
- SMART CUT 2
™
ALONE APPLICATION.
DECIMAL
VALUE
INPUT # SELECTION RESPONSE APPLICATION
0 AUTOMATIC ACHAN0
1 COMPUTER 1 ACHAN1
2 COMPUTER 2 ACHAN2
3 C.VIDEO 1 ACHAN3 S-CUT 2
4 C.VIDEO 2 ACHAN4 ALONE
5 S.VIDEO 1 ACHAN5
6 S.VIDEO 2 ACHAN6
7 RGB/YUV ACHAN7