SMART CUT 2™ Chapter 6 : LCD SCREEN DESCRIPTION
PAGE 15
Chapter 6 :
LCD SCREEN DESCRIPTION
6-1.
INTRODUCTION
The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
•
The STATUS MODE indicates the input and output status of the SMART CUT 2
™
.
•
The CONTROL MODE allows to select and adjust the parameters of the SMART CUT 2
™
.
6-2.
CONTROL BUTTONS
The LCD screen is controlled by 3 buttons :
CONTROL
knob:
To scroll thru the different menus.
EXIT
/
MENU
button:
•
From the STATUS MODE, press this button to display the CONTROL MODE.
•
From the CONTROL MODE, press this button to :
- return to the previous menu.
- return to the STATUS MODE (press several times).
- return without safeguarding the item.
ENTER
button :
•
From the STATUS MODE, press this button to return to the last consulted menu.
•
From the CONTROL MODE, press this button to confirm a selected item.
NOTE
: When entering in the CONTROL MODE, the LCD window will automatically display the STATUS MODE
after 60 seconds of inactivity of the front panel buttons.
6-3.
STATUS MODE
When switching ON, the LCD SCREEN shows the product's name and reference as follows:
PRODUCT NAME
SMART CUT 2
MAIN
STATUS MENU
PRODUCT MODEL
S-CUT 2
OUTPUT
SYNC = H & V
d
OUTPUT STATUS MENU
c
SXGA
64.0K / 60Hz
e
f
OUTPUT : COMPUTER 1
SELECTION STATUS MENU
g
PRESET : C.VIDEO 1
c
OUTPUT FORMAT.
d
OUTPUT SYNC TYPE.
e
OUTPUT LINE FREQUENCY / FRAME FREQUENCY.
f
SELECTED INPUT (DISPLAYED ONTO THE OUTPUT).
g
PRE-SELECTED INPUT.
