OCTO
²
/ QFX402
Chapter 7 : REMOTE CONTROL SOFTWARE (continued)
PAGE 39
7-3. COMMUNICATION SETUP (continued)
•
CASE OF LAN PORT:
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(
CONTROL > LAN setup
), then activate the LAN communication port (
CONTROL > RS232/LAN port >
LAN
).
- With the
Controls
menu of the software, select
RS232/LAN setup
and
LAN Setup
. Then configure the
Local
port
, the
Remote IP address
and the
Remote port
and click on
Apply
to setup the new values. The software will
also display
Device connected
.
7-4. USING THE SOFTWARE
c
Click on the
Settings
button (left bottom of the window) to display the
Settings
window.
d
Click on the
Input Settings
tab and select the
Signal
Type
for each input.
Then make the others adjustments
(video
Standard
...).