OCTO
²
/ QFX402
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
PAGE 33
6 [EFFECT
**
]
This menu allows to adjust the
EFFECT PRESET
key.
6-1 [Key 1 Cut]:
allows switching seamlessly the pre-selected input onto the output.
6-2 [Key 2 Title]:
Allows to overlay a title on the output. The title should be create using software such as PowerPoint:
the text should be bright (yellow, white) on a black background. A shadow bar is also available for increasing the
readability of the text on bright images
c
Select the
[duration]
of the transition with
+
ENTER
between:
•
[holding]:
The text appears after pushing on the "Title source" button, and will be removed only by a
second push on this button.
•
[3s]:
3 seconds transition.
•
[5s]:
5 seconds transition.
•
[custom]:
Select a duration from 0.5 second up to 25 seconds by 0.5 second steps.
d
Select the
[Size]
of the shadow bar with
+
ENTER
.
e
Select the vertical
[Position]
of the shadow bar with
+
ENTER
.
f
Select the
[Intensity]
of the shadow with
+
ENTER
.
g
Select the
[Effect opening]
and the
[effect closing]
of the title between
[Cut]
&
[Fade]
with
+
ENTER
.
6-3 [Key 3 Fading]:
allows fading the pre-selected input to the output. You can select the duration of the transition as
indicated below:
•
[1s]:
1 second transition.
•
[3s]:
3 seconds transition.
•
[5s]:
5 seconds transition.
•
[Custom]:
Select a duration from 0.5 second up to 25 seconds by 0.5 second steps.
7 [AUDIO] +
ENTER.
7-1 [Master volume] +
ENTER.
Adjust the audio output level with
+
ENTER.
7-2 [Audio mode] +
ENTER.
Select the output audio mode with
+
ENTER.
•
[Mono]:
Set the output in mono mode.
•
[Stereo]:
Set the output in stereo mode.
7-3 [Audio source] +
ENTER.
Select an item with
+
ENTER
:
•
[Auto follow]
: The audio follows the video image.
•
[Input --]
: The selected audio input is permanently diffused.
7-4 [Audio level] +
ENTER.
This function allows to separately adjusting the level of each audio input. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
7-5 [Audio balance] +
ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with
+
ENTER.
NOTE
: This function acts on the selected (diffused) audio input.
7-6 [AUX input] +
ENTER.
7-7 [Mute off] +
ENTER.
Switch ON or OFF the audio output
.
Validate with
ENTER
.
** OFX803, OFD803 & QFX402.
