OCTO
²
/ QFX402
Chapter 5 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
PAGE 29
4 [IMAGE] +
ENTER.
•
If the selected input type is a VIDEO signal the IMAGE MENU displays the following items:
4-1 [Pos. settings] +
ENTER.
Select one of the following functions with
+
ENTER.
4-1-1 [H position] +
ENTER.
Adjust the Horizontal position with
+
ENTER.
4-1-2 [V position] +
ENTER.
Adjust the Vertical position with
+
ENTER.
4-1-3 [H size] +
ENTER.
Adjust the Horizontal size with
+
ENTER.
4-1-4 [V size] +
ENTER.
Adjust the Vertical size with
+
ENTER.
4-2 [Aspect in] +
ENTER.
Select the Aspect Ratio of your input source with
+
ENTER.
•
[4/3 standard]
: 4/3 input format.
•
[16/9 letterbox]:
Letterbox input format.
•
[WS anamorphic]:
Widescreen Anamorphic input format (video) or 16/9 input format (computer).
4-3 [Aspect out] +
ENTER.
Select one of the following output aspect ratio with
+
ENTER.
•
[Standard]
: The entire image and the aspect ratio are preserved.
•
[Crop]
:
The image is zoomed without deformation to fill the screen, but some borders of the image will
be cropped. The aspect ratio is preserved.
•
[Full Screen]
: The image is stretched to fill the screen. The aspect ratio is not preserved.
•
[Zoom]
:
The image can be zoomed, cropped and stretched at your convenience.
4-4 [Brightness] +
ENTER.
Adjust the Brightness with
+
ENTER.
4-5 [Contrast] +
ENTER.
Adjust the Contrast with
+
ENTER.
4-6 [Color] +
ENTER.
Adjust the Color with
+
ENTER.
4-7 [Hue] +
ENTER.
Adjust the Tint of the picture (NTSC only) with
+
ENTER.
4-8 [U/overscan] +
ENTER.
Select Underscan or Overscan with
+
ENTER.
•
[Underscan]:
Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
•
[Overscan]:
Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
4-9 [Preset] +
ENTER.
This function allows setting all the image parameters to the factory settings. Select
[YES]
and validate with
ENTER
.
