Analog way Digi Scan 1600, Руководство пользователя

Страница: 16 / 28

Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) SCAN 1600 / DIGI SCAN 1600
PAGE 16
3-5. FUNCTIONS DESCRIPTION
1 [INPUT] +
ENTER.
1-1 [Input status] +
ENTER
.
Displays the input status.
1-2 [Input type] +
ENTER
.
Select one of the following input types with +
ENTER
:
•
[analog]:
Analog computer source connected to the HD15 input connector.
•
[DVI] :
Digital computer source connected to the DVI input connector.
1-3 [SOG input] +
ENTER.
Select [Yes] if your input signal is in RGsB (SOG: Sync On Green), and valid with ENTER.
1-4 [H sync load] +
ENTER.
Select the Horizontal sync load of your input signal with + ENTER.
1-5 [Genlock load] +
ENTER.
(Available on DSV1600 only).
Set on
Hi-Z
if the genlock out is used.
1-6 [Genlock H. ph.] +
ENTER
. (Available on DSV1600 only).
This function allows to adjust the genlock horizontal phase. Adjust with + ENTER.
1-7 [Genlock Sc. ph.] +
ENTER
. (Available on DSV1600 only).
This function allows to adjust the genlock Subcarrier phase. Adjust with + ENTER.
2 [OUTPUT] +
ENTER
.
2-1 [Output status] +
ENTER.
Displays the output status.
2-2 [Output std.] +
ENTER
.
Select one of the following standards with +
ENTER
:
•
[NTSC]
: NTSC standard for composite and S.VIDEO output and 60Hz frame rate for RGB/S and YUV
output.
•
[PAL]
: PAL standard for composite and S.VIDEO output and 50Hz frame rate for RGB/S and YUV
output.
•
[NTSCj]
: NTSC Japan standard for composite and S.VIDEO output and 60Hz frame rate for RGB/S and
YUV output.
2-3 [Output rate] +
ENTER
.
Select one of the following functions with + ENTER .
•
[Internal]
: The output standard depends of the selected output standard menu.
•
[Genlock]
: The output standard is synchronized onto the genlock input standard.
2-4 [RGB/YUV out] +
ENTER.
Select the RGB/YUV wanted output with + ENTER.
•
[YUV]
: Component video output.
•
[RGBS]
: RGB/S video output.
•
[RGsB]
: RGB with Sync On Green video output.
2-5 [test pattern] +
ENTER.
Select one item with + ENTER .
•
[yes]
= displays a test pattern onto the output.
•
[no]
= turns OFF the test pattern.