SCAN 1600 / DIGI SCAN 1600
Chapter 1 : INTRODUCTION (continued)
PAGE 11
1-9. SCAN 1600 FRONT PANEL DESCRIPTION
ANALOG WAY
R
SCAN 1600
MENU CONTROL
Allows to scroll thru the different menus (in Control mode).
ENTER
:
Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on this
push button allows to wake up the device.
EXIT
MENU:
Allows to exit from a LCD menu
.
ADJUSTMENTS
POS. SIZE:
Position or Size mode selection.
H:
Horizontal image adjustment.
V:
Vertical image adjustment.
ZOOM:
Zoom mode selection (long push)
FREEZE:
Freezes the displayed output (short push).
1-10. SCAN 1600 REAR PANEL DESCRIPTION
Ω
RS-232:
RS-232 communication port on a DB9 female connector.
INPUT & MONITOR
COMPUTER INPUT:
Analog computer input on HD15 female connector.
DVI-D INPUT
:
DVI-D computer input on DVI-I female connector.
RGB Hi-Z / 75
Ω
:
RGB input load. Set this button on Hi-Z if you connect a monitor on the MONITOR OUT
connector. If not set it on 75
Ω
.
MONITOR OUTPUT:
Analog computer output (loop-through) on HD15 female connector.
VIDEO OUTPUTS
R, G, B, S
:
RGB/S or RGsB video outputs (on 3 or 4 BNC connectors).
Cr, Y, Cb
:
Component video output (on 3 BNC connectors).
PAL/NTSC
:
Composite video output (1 BNC connector).
S.VIDEO
:
S.VIDEO output (4-pin mini DIN connector).
+5 Vdc:
DC input connector.
