SCAN 1600 / DIGI SCAN 1600
PAGE 14
Chapter 3 : FRONT PANEL DISPLAY MENU DESCRIPTION
3-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
•
The STATUS MODE indicates the input and output status of the device.
•
The CONTROL MODE allows selecting and adjusting the parameters of the device.
3-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob:
•
In the CONTROL MODE, turn this knob to scroll thru the different menus.
ENTER
button:
•
From the STATUS MODE, press this button to enter in the CONTROL MODE.
•
From the CONTROL MODE, press this button to confirm a selected item.
EXIT
/
MENU
button:
•
From the STATUS MODE, press this button to enter in the CONTROL MODE.
•
From the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
3-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL
DSV1600
DEVICE
STATUS
DEVICE VERSION
Version _._
Input :
SVGA
c
INPUT STATUS
H = 37.9K
V= 60 Hz
d
Output :
NTSC
e
OUTPUT
STATUS
Internal 59.94
f
c
INPUT FORMAT
d
HORIZONTAL FREQUENCY (in kHz) / VERTICAL FREQUENCY (in Hz).
e
OUTPUT STANDARD.
f
OUTPUT RATE TYPE / OUTPUT FREQUENCY
