Analog way ASC1602-4K страница 72 Скачать руководство пользователя

Страница: 72 / 127

7.3.15 Services management

UPDATE:

You have several way to update your

LiveCore™ unit

• by using the upload updater:

Click on “Select a file on your disk” button in order to open the directory

file on your computer. Simply select the file you take from Analog Way’s

servers and click ok. Then click on GO to launch the update.

• by USB key:

Please note that you also can update the device through the USB Port,

please refer the

chapter

8.1.1 Front panel update

7.3.15 Services management

IMPORT/EXPORT:

The Export section allows the user to generate and download on a

computer a backup file. This file can be customized; it can include the

device configuration and the logo library (that also can be loaded), the

device logs, snapshots and statistics (only for the export).

The Import section allows the user to upload a backup file. Push upload

button then choose the directory on your computer. Please note that

the file size is limited to 400MB when using the

Web RCS

SPU: (only when a SPU is plugged)

When a Secure Power Unit is connected to the device, the SPU

is displayed. It gives a feedback of the SPU status, the battery

temperature and charge, the two power supply unit voltage/

current and temperature.

TEMPERATURE:

A temperature notification will pop up if your device reaches some critical temperature.

The temperature section will allow you to check overheating alarms on device compo

nents, and take action whenever required:

- Preventive standby alarm:

sending the device to standby is strongly recommended.

- Forced safety standby alarm:

the device will be sent to standby if the alarm persists

for over 5 minutes.

Please contact your local technical support if the alarm persists after a period of cooldown.

NOTE:

You can abort forced safety standby mode and overwrite all

temperature alarm notifications by clicking on the

Abort safety standby

mode

button.

/!\ Be aware:

You will no longer be notified about tempe

rature alarms until next reboot, and forced safety standby will not occur.

Содержание ASC1602-4K
































































































































Результаты поиска

Содержание ASC1602-4K

Отзывы:

Похожие инструкции для ASC1602-4K

Бренды по названию

Популярные бренды

Analog way ASC1602-4K, Руководство пользователя

Результаты поиска

Содержание ASC1602-4K

Отзывы:

Похожие инструкции для ASC1602-4K

Бренды по названию

Популярные бренды