AMX Modero NXD-CV7, Руководство по эксплуатации/справочник

Страница: 111 / 220

Firmware Pages and Descriptions
101 7" Modero Widescreen Touch Panels
These Navigation Buttons are specific to these Modero panels and include panel specific elements
described in the following table:
Protected Setup Page
The Protected Setup page (FIG. 92) centers around the properties used by the panel to properly
communicate with the NetLinx Master. Enter the factory default password (
1988) into the password
keypad to access this page.
Protected Setup Navigation Button Elements
G4 Web Control: Press the G4 Web Control button to access the G4 Web Control page where
you can enable or disable display and control of your panel (via the web) by a
PC running a VNC client.
• Refer to the G4 Web Control Page section on page 103 for more detailed
information.
Sensors: Press the Sensors button to access the Sensors Setup page where you can
modify/monitor both the light and motion sensor settings.
• Refer to the Sensor Setup section on page 105 for more detailed information.
Passwords: Press the Passwords button to access the Passwords Setup page where you
can specify up to five security passwords.
Default password is 1988.
• Refer to the Password Setup Page section on page 108 for more detailed
information.
Calibrate: Press the Calibrate button to access the Calibration page where you can use
the displayed set of crosshairs to calibrate a touch panel.
• Refer to the Calibration Page section on page 109 for more detailed
information.
Wireless Settings: Press the Wireless Settings button to access the Wireless Settings page where
you can setup the wireless connection parameters used by the internal
NXA-WC80211GCF wireless interface card.
• Refer to the Wireless Settings Page section on page 109 for more detailed
information.
System Settings: Press the System Settings button to access the System Settings page where
you can alter the communication parameters of both the NetLinx Master and
Modero panel.
• Refer to the System Settings Page section on page 132 for more detailed
information.
FIG. 92 Protected Setup page-showing default values
Provides access to the panel
firmware pages by enabling the
- Setup page (after a 3 second
- Calibration page (after a 6 second
grey front setup access button:
press/hold)
press/hold)