AMX Enova DVX-2100HD, Руководство по эксплуатации/справочник

Страница: 99 / 111

Programming
88 Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
UDM SEND_COMMANDs (Cont.)
?SB
Requests the brightness of
the signals delivered to a
connected display.
Queries the brightness of the signals delivered to a connected display.
Syntax:
SEND_COMMAND <DEV>,?SB
Example:
SEND_COMMAND dvRX1,?SB
Device would respond with "SB-<value>" where value is the brightness level.
For example, the device might respond with "SB-70"
SB
Sets the brightness of the
signals delivered to a
connected display.
Syntax:
SEND_COMMAND <DEV>,"SB<B#>'"
Variables:
B# = brightness (0-255 = brightness value)
Example:
SEND_COMMAND dvRX1,"'SB46'"
Sets the brightness to 46 (about half way).
SD
Set the brightness,
sharpness, and skew.
Sets the brightness, sharpness, and skew of the signals delivered to a
connected display based on distance and cable type.
Syntax:
SEND_COMMAND <DEV>,"SD<D#CC#>'"
Variables:
D# = distance (0-255 = cable length in meters)
C# = cable type, "CAT5", "CAT5e", "CAT6", "CAT7"
Example:
SEND_COMMAND dvRX1,"'SD100CCAT5e'"
Sets the cable compensation for 100m of CAT5e cable.
?SKB
Requests the skew on the
blue video channel.
Syntax:
SEND_COMMAND <DEV>,?SKB
Example:
SEND_COMMAND dvRX1,?SKB
The device would respond with "SKB-<blueskew>". For example, the device
might respond with "SKB-7".
SKB
Sets the skew on the blue
video channel.
Syntax:
SEND_COMMAND <DEV>,"SKB<B#>'"
Variables:
B# = skew value (delay in 2nS intervals), 0-31 = skew value
Example:
SEND_COMMAND dvRX1,"'SKB4'"
Sets the blue skew value to 4 (adds 8nS delay to blue video).
?SKG
Requests the skew on the
green video channel.
Syntax:
SEND_COMMAND <DEV>,?SKG
Example:
SEND_COMMAND dvRX1,?SKG
The device would respond with "SKG-<greenskew>". For example, the device
might respond with "SKG-7".