AMX Enova DVX-2100HD, Руководство по эксплуатации/справочник

Страница: 63 / 111

Audio/Video Configuration
52 Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
4 - Video Adjustment : Use the sliders to alter the various level adjustments applied to the incoming video
image.
5 - Video Test Pattern : Click the check box to activate a video test pattern to be sent to both outputs.
Afterward, you can choose a test pattern from the corresponding drop-down menu. You can choose from Color
Bar, Gray Ramp, SMPTE Bar, HiLoTrak, Pluge, and Cross Hatch. Click the check box again to deactivate the
test pattern and return to viewing the selected input.
6 - Input Resolution : Click Auto to have the unit automatically detect the video resolution for the selected
input signal, or click Manual to manually select the video resolution for the selected input signal. After clicking
the Manual option button, select a resolution from the corresponding drop-down menu.
7 - Video Shift : Use the slider to shift the position of the video image left and right.
8 - UDM Input : Use the sliders to alter the brightness (gain) and sharpness (compensation) levels for the UDM
input.
9 - Output 1 Resolution : Click Auto to have the unit automatically set the video resolution for display output 1
based on the EDID information received from the connected display device. Click Manual to manually select
the video resolution for display output 1. After clicking the option button, select a resolution from the
corresponding drop-down menu.
10 - Output 1 Aspect Ratio Preference : Select the appropriate option button to indicate the aspect ratio of
output signal 1. There is a separate group of aspect ratio settings for each output. You can choose from Full,
Zoom, Stretch, and Anamorphic.
11 - OSD Overlay : Indicate whether you want the on-screen display overlay to be turned on or off.
12 - UDM Receiver : Use the sliders to alter the UDM receiver’s skew, brightness, and sharpness levels. These
option is unavailable if you are not using a UDM receiver for your video output.
13 - Output 2 Resolution : Click Auto to have the unit automatically set the video resolution for display output
2 based on the EDID information received from the connected display device. Click Manual to manually select
the video resolution for display output 2. After clicking the option button, select a resolution from the
corresponding drop-down menu.
14 - Output 2 Aspect Ratio Preference : Select the appropriate option button to indicate the aspect ratio of
output signal 2. There is a separate group of aspect ratio settings for each output. You can choose from Full,
Zoom, Stretch, and Anamorphic.
Your video configuration is not affected by a power loss, restarting the unit, or
upgrading the firmware.