AMX Enova DVX-2100HD, Руководство по эксплуатации/справочник

Страница: 15 / 111

Overview
4 Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
DVX-2100HD Specifications (Cont.)
Rear Panel Components (Cont.):
CONFIG DIP Switch: 4-position Master configuration DIP switch allows setting the onboard Master
execution mode (PRD or normal).
See the CONFIG DIP Switch section on page 16 for details.
PROGRAM Port: Type-B USB connector connects the DVX-2100HD to a USB port on a PC.
This USB connection is used to configure system settings.
Note : Not recommended for firmware updates or large file transfers. These more
data-intensive operations are better handled via Ethernet.
See the PROGRAM Port (Type-B USB) section on page 17 for details.
ID Pushbutton: Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control
Device. It has no effect on the Internal Switcher Device.
See the ID Pushbutton section on page 17 for details.
ETHERNET 10/100
Port: RJ-45 connector provides TCP/IP communication. This is an Auto MDI/MDI-X
enabled port, which allows you to use either straight-through or crossover Ethernet
cables.
The Ethernet Port LEDs show communication activity, connection status, speeds,
and mode information:
• SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and
turns Off when the speed is 10 Mbps.
• L/A (link/activity) - Green LED lights On when the Ethernet cables are connected
and terminated correctly, and blinks when receiving Ethernet data packets.
See the LAN (RJ-45) section on page 18 for details.
AxLink Port: 1 3.5 mm captive-wire connector provides data and power to external control
devices. The AxLink LED (green) indicates the state of the AxLink port. The AxLink
port can be used to supply power to downstream AxLink-compatible devices as long
as the maximum current draw is less than 2A.
Note : The AxLink port provides only limited power to connected AxLink devices. It is
recommended to use an alternate power source when connecting AxLink devices to
the DVX-2100HD.
See the AxLink Port and LED (4-pin captive-wire) section on page 19 for details.
Power Connector: IEC Power cord connector:
• 100-240V AC
• 47-63Hz
• 2.5A maximum
Operating
Environment: • Storage temperature: -10º C to 60º C (14º F to 140º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
Supported Video
Resolutions: HD resolutions up to 1080p and RGB resolutions up to 1920 x 1200 @ 60Hz
Dimensions (HWD): • 3.5" x 17" x 14.25"
• 8.89cm x 43.18cm x 36.2cm
Weight: • 14.7 lbs (6.67 kg)
Enclosure: Metal with black matte finish
Certifications: • RoHS
• FCC Class B
• CE
• CB Scheme
• UL