AMX Enova DVX-2100HD, Руководство по эксплуатации/справочник

Страница: 41 / 111

Wiring and Device Connections
30 Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
UDM OUTPUT
The UDM OUTPUT port (FIG. 44) connects to the input port of an UDM Multi-Format Receiver, allowing the
DVX-2100HD to serve as a UDM Distribution Hub.
Compatible UDM Multi-Format Distribution Receivers include:

UDM-RX02 (FGUDM-RX02)

UDM-RX02N (FG1402-20)
See the table in the UDM INPUTS (5-6) section on page 26 for a description of the pinout configuration of the
UDM OUTPUT port.
Audio & Video Formats/Resolutions/Distance
The following table provides recommended maximum distances for cable runs, based on video class type at
various resolutions. These distances are only for the UDM OUTPUT port.
It is important to note that the maximum distances indicated above are not absolute, but are recommended
distances that have been tested to deliver video at the specified resolutions, without significant signal
degradation. In particular, lower resolutions (640 x 480, 720 x 480 and 800 x 600) can often be delivered
significantly further than what is indicated in the table.
FIG. 44 UDM OUTPUT connector
Serial and IR control is only possible from the DVX-2100HD when using a
UDM-RX02N receiver.
Using a DVX video output signal of 1080p or greater to a UDM-RX02N receiver may
result in a shifted image and other video artifacts.
Audio & Video Formats/Resolutions/Distance
Class Format Name UDM
Composite/S-Video 720 x 480 NTSC 50 m / 165’
720 x 576 PAL 50 m / 165’
Component 720 x 480 480p 50 m / 165’
720 x 576 576p 50 m / 165’
1280 x 720 720p 50 m / 165’
1920 x 1080 1080i 50 m / 165’
1920 x 1080 1080p 50 m / 165’
RGBHV 640 x 480 VGA 50 m / 165’ *
800 x 600 SVGA 50 m / 165’ *
1024 x 768 XGA 50 m / 165’ *
1280 x 1024 SXGA 50 m / 165’ *
1600 x 1200 UXGA 50 m / 165’
1920 x 1080 HD 50 m / 165’
* When using VGA modes with audio enabled , the
maximum cable distance is approximately 50 m / 165’ (UDM-RX02N).