background image

21

USER MANUAL

DCP-SRX

2) Volume & Mute

The Volume & Mute section is to adjust volume level (through the horizontal volume 
meter) and mute/unmute (through the Mute button) the audio output signal. 

Control

The Control sub-menu is used to perform the following functions:
•  CEC Controller
•  RS232 Controller
•  RS232 Pass-through

1) CEC Controller

DCP-SRX is embedded with a CEC controller and will automatically power on/off the 
display connected to its HDMI OUT port when CEC Auto Control is switched on. 

Above all, for CEC control of DCP-SRX to be effective, the display connected should 
support CEC over HDMI. 

 

CEC Auto-Control ON/OFF: Click to enable or disable CEC Auto Control. When 

enabled, the DCP-SRX will send a CEC command to turn off the display connected 
to HDMI OUT when there’s no signal present after a defined Delay Time or turn it 
on immediately when there’s active signal. 

 

Delay Time (min): Set the delay time of turning off the display after it receives CEC 

command from DCP-SRX. The time is 0 - 30 minutes. 

 

CEC Manual Control: Click to turn on or off the display manually.

Содержание DCP-SRX









































Отзывы: