![background image](http://html.mh-extra.com/html/amx/axb-tmc/axb-tmc_instruction-manual_2937419007.webp)
Product Information
3
AXB-TMC/TMX+ Television Managers
Setting DIP Switches
The Device and Auxiliary DIP switches must be set before installing the AXB-TMC/TMX+.
Device DIP switch
Axcess can control up to 255 AXlink devices; each device is assigned a device number in the
Axcess program. AMX standard device numbers for interface bus devices are 96 - 127. (Axcess
cards are in the range from 1 to 95, and control panels are in the range of 128 - 255.) Set the device
number on the AXB-TMC/TMX+ to match the device assignment in the Axcess program. The
following table shows the Device DIP switch and lists the DIP switch setings and values.
Auxiliary DIP switch
Factory default settings for the Auxiliary (S2) DIP switch are shown in the following table.
AXB-TMC/TMX+ Specifications (Cont.)
Side panel
DEVICE DIP switch
An eight-position DIP switch is used to set the device number for the
AXB-TMC/TMX+. For more information, refer to the Setting the
DEVICE DIP
switch
subsection.
Auxiliary DIP switch
The Auxiliary DIP switch sets external receiver settings, sensitivity of the
CC-XPS external frequency television scan sensor, and the IR frequency.
Enclosure type
Metal with black matte finish
Weight
AXB-TMC - 1.2 lb. (544.3 g)
AXB-TMX+ - 1.0 lb. (453.5 g)
Dimensions
1.74" x 4.06" x 10.63" (4.42 cm x 10.31 cm x 27.00 cm)
Accessories included
• One CC-XPS external frequency scan sensor
• One CC-IRC emitter
Optional Accessories
• IRX-SM+ Swivel Mount IR Sensor to increase coverage
• TMX-RK Rack Kit
• Security Bracket Kit - To prevent accidental connector disconnects, an
optional security bracket is available for hard mounting to the rear of either
unit. The security bracket affords the ability of using cable ties to secure
individual cables to the bracket. It mounts with two screws to the rear of
either the AXB-TMX+ or AXB-TMC.
• Angle Bracket Kit
Device DIP Switch Settings
Position
1
2
3
4
5
6
7
8
Value
1
2
4
8
16
32
64
128
Auxiliary DIP Switch Factory Default Settings
Switch
Position
Switch
Position
1
Up (OFF)
5
Up (OFF)
2
Up (OFF)
6
Down (ON)
3
Up (OFF)
7
Down (ON)
4
Down (ON)
8
Up (OFF)
1 2 3 4 5 6
8
ON
7
Содержание AXB-TMC
Страница 1: ...instruction manual AXlink Bus Controllers AXB TMC TMX Television Managers ...
Страница 10: ...Product Information 6 AXB TMC TMX Television Managers ...
Страница 20: ...Installation 16 AXB TMC TMX Television Managers ...
Страница 22: ...Upgrading the Firmware 18 AXB TMC TMX Television Managers ...