AMX AXB-TMC, Инструкция по эксплуатации

Страница: 26 / 42

Programming
22
AXB-TMC/TMX+ Television Managers
System Send_Commands (Cont.)
CTON
Sets the IR pulse (single) on
time for each channel digit
and IR functions. Time is
stored in permanent mem-
ory. System default is 5
(.5 second).
Syntax:
"'CTON',<Time>"
<Time> = 0 through 255 in tenths of a second. The <Time> value is returned in
.10 second increments.
Example:
SEND_COMMAND AXBTMX,"'CTON',20"
Sets the pulse length to 2 seconds on the AXB-TMC/TMX+.
?CTON
Sends the current on-time
pulse string CTON,<Time> to
the Central Controller.
Syntax:
'?CTON'
Example:
SEND_COMMAND AXBTMX,'?CTON'
Sends the current on-time pulse string from the AXB-TMC/TMX+ to the Central
Controller in the CTON <Time> format.
DC
Sets a direct connection so
the <IR out> (IR function)
data transmits while the <IR
in> code is received.
Syntax:
"'DC',<IR in>,<IR out>"
Variables:
<IR in> = custom IR functions assigned to hand-held IR transmitting device.
<IR out> = IR functions (see IR functions table on page 20).
The PUSH and RELEASE for the <IR in> code is not sent to the AXC-EM. The
maximum number of direct connections is 16.
Example:
SEND_COMMAND AXBTMX,"'DC',145,24"
Connects IR-in 145 to IR-out 24 and increases the volume level on the equip-
ment connected to the AXB-TMC/TMX+.
DE
Sets the delay time in .10
second increments for the
television power sensor
(CC-XPS or PCS) to stabilize
before sensing for a status
change.
Syntax:
"'DE',<Time>"
Variable:
<Time> = 0 through 255.
System default time is 10 (1 second). Set the <Time> value in .10 second
increments.
Example:
SEND_COMMAND AXBTMX,"'DE',10"
Sets the delay time to 1 second for the CC-XPS or PCS connected to the
AXB-TMC/TMX+.
?DE
Sends the current television
power sensor (CC-XPS)
delay time string DE,<Time>
to the AXC-EM.
Syntax:
'?DE'
Example:
SEND_COMMAND AXBTMX,'?DE'
The AXB-TMC/TMX+ sends the current television power sensor delay time to
the Central Controller in the DE <Time> format.
All ? (request) SEND_ COMMANDS respond with strings to the
Central Controller. If an RS-232 device connected to the AXB-TMC/TMX+ is
also sending strings to the Central Controller, the Axcess software program
must be written to accommodate the mixing of data between the device and
the AXB-TMC/TMX+ response strings in the buffer.