![background image](http://html.mh-extra.com/html/amx/axb-tmc/axb-tmc_instruction-manual_2937419012.webp)
Installation
8
AXB-TMC/TMX+ Television Managers
TV Sensor Connections
FIG. 4 shows how to connect the CC-XPS to the TV sensor connector to detect horizontal scan
frequencies up to 65 kHz.
CC-IRC Emitter Wiring Connections
FIG. 5 shows how to connect a CC-IRC IR Emitter to the IR EMITTER connector on the AXB-
TMC/TMX+.
IR emitter to device installation
The following steps describe the installation of the IR emitter to the television IR window.
1.
Using a sharp edged tool (knife blade, razor knife, etc.), separate the factory-installed shell, as
shown in FIG. 6.
2.
Test-fit the IR shield (FIG. 7) to the television's IR window. If necessary, use scissors and trim
the shield to fit.
FIG. 4
TV sensor connector
FIG. 5
IR emitter connector wiring diagram
FIG. 6
Removing factory installed shell
FIG. 7
IR shield
GND
SENSOR
TV sensor
connector
Television
CC-XPS
GND
SIG
IR emitter
connector
Television
CC-IRC
Содержание AXB-TMC
Страница 1: ...instruction manual AXlink Bus Controllers AXB TMC TMX Television Managers ...
Страница 10: ...Product Information 6 AXB TMC TMX Television Managers ...
Страница 20: ...Installation 16 AXB TMC TMX Television Managers ...
Страница 22: ...Upgrading the Firmware 18 AXB TMC TMX Television Managers ...