![background image](http://html.mh-extra.com/html/amx/axb-tmc/axb-tmc_instruction-manual_2937419017.webp)
Installation
13
AXB-TMC/TMX+ Television Managers
Detachable mounting
Self-adhesive Velcrop strips can be mounted to the top or bottom of the unit's housing for surface
mounting, or the flush-mount brackets. The following steps explain how to mount the
AXB-TMC/TMX+ to a flat surface, after installation of the angled mounting brackets to the unit,
using self-adhesive Velcro.
1.
Using scissors, cut two strips of Velcro the length of the three-hole side of the angled mounting
bracket.
2.
Peel the backing from one side of the cut Velcro strips. Then, position the Velcro strip onto the
bottom (three-hole side) of the angle bracket and press firmly against the strip to activate the
adhesive.
3.
Repeat steps 1 and 2 for the other mounting bracket. Then, go to the next step.
4.
Remove the remaining two backing strips from the Velcro
®
and position the
AXB-TMC/TMX+ above the spot it is to be mounted.
5.
Slowly place the AXB-TMC/TMX+ against the mounting location and press firmly to secure
the adhesive.
Permanent mount installation
To permanently mount the AXB-TMC/TMX+:
1.
Install the optional angle-mount brackets (see
Installing Angle Mounting Brackets
).
2.
Position the AXB-TMC/TMX+ on the mounting surface; mark the position of the mounting
holes on the mounting surface.
3.
If the mounting surface is drywall or cinder block, use the appropriate customer furnished
mounting anchors to attach the AXB-TMC/TMX+. If the mounting surface is wood, drill pilot
holes (using a bit 1/3 smaller than the screw size) for the included mounting screws. Then,
secure the unit with the mounting screws.
Содержание AXB-TMC
Страница 1: ...instruction manual AXlink Bus Controllers AXB TMC TMX Television Managers ...
Страница 10: ...Product Information 6 AXB TMC TMX Television Managers ...
Страница 20: ...Installation 16 AXB TMC TMX Television Managers ...
Страница 22: ...Upgrading the Firmware 18 AXB TMC TMX Television Managers ...