6
READING THE DISPLAY DURING TREATED WATER FLOW
ELECTRONICS DISPLAY
The Electronics display on the
eSpring
®
Water Purifier keeps track of actual water
usage (gallons/litres) and when the Cartridge was installed. When properly plugged into
an electrical outlet, the Water Purifier will display its status via the Electronic Module
LED display.
STATUS
WATER
DROPS
CUP
ICON
CARTRIDGE
ICON
LIFE
INDICATOR
BEEPER
PHONE
COMMENTS/ACTIONS
Normal display
Blue
Blue
Blue
Blue
Off
Off
Normal
Top Shroud removed
(Reseat for display)
Blue
Red*
Blue
Blue
Repeated
Off
Cup icon On/Red –
Do not operate, replace Top Shroud
Cartridge not recognized
Blue
Red*
Off
Off
Repeated
Off
Install Cartridge – Light On/Red
Cup icon On/Red
Lamp malfunction
Blue
Red*
Blue
Blue
Repeated
Red*
Phone icon On/Red;
Need replacement Cartridge
Under 10% Cartridge life
remaining
Blue
Blue
Blue
Last
segment
flashing
Once at
flow start
Off
Order replacement Cartridge
End of Cartridge life
Blue
Red*
Flashing
Off
Every 2
seconds
Off
Install Cartridge – Light On/Red
Water Purifier
needs servicing
Blue
Off
Off
Off
Repeated
Red*
Cup icon; Phone icon
Need new Electronic Module
Call Customer Service
Water Purifier
malfunction
Flashing
Flashing/
Red*
Flashing
Flashing
Constant
tone
Flashing/
Red*
Phone icon On/Red. All other segments flashing
Unplug immediately. Wait 5 minutes. Plug back in and run
treated water. If unsuccessful, call Customer Service.
Blank display
Off
Off
Off
Off
Off
Off
Plug in unit or wait for power to return.
No rolling water drops
Not blue,
not moving
Off
Blue
Blue
Off
Off
No UV treatment - Normal display does not
change when treated water flows. Sensor
malfunction. Call Customer Service.
1035795_eng.indd 6
6/10/14 4:56 PM