Amtel Direct-Line DL701, Руководство пользователя

Страница: 52 / 69

To delete:
a. Press
DELETE
twice. If additional messages are stored, the next message
will be displayed.
Note: Pressing
CLEAR
at any point during recall returns the unit to idle mode.
Redirecting/Editing Remotely Recalled Messages
There may be times when a message sent to another Amtel user needs to be changed
or redirected to another user. Instead of deleting the message and entering a new one,
you can remotely recall the message, edit, and send it back to the original recipient or
to another Amtel user.
The unit you wish to access must be set to remote recall.
1. At a keyboard, press and hold
SHIFT
and press the
MESSAGE RECALL
key.
The screen displays:
RECALL MESSAGES FOR ? ?
2. Enter the address of the unit you wish to access and press
SEND
. The screen
displays:
ENTER PASSWORD ? ? ? ?
3. a. If a password is not set, press
SEND
.
b. If a password is set, enter the password and press
SEND
.
Note: If a password is incorrectly entered the screen flashes INVALID PASSWORD and re-
turns screen to idle mode.
4. The screen displays:
* MESSAGE 1 FROM BB
(with the address of the person who sent the first message).
5. Repeatedly press the
MESSAGE RECALL
key to scroll through all messages
until the desired message text is displayed.
6. Press the
MESSAGE ENTER
key. The screen displays:
MESSAGE TO ? ?
Enter the original recipient’s address and/or another address and press
SEND
.
7. The screen displays the last line of the message, with the cursor flashing at
the end. Edit the message as needed. (Refer to Editing section.)
8. After the message has been modified, press
SEND
. The screen will return to
the beginning of the message you just modified.
9. To view:
a. Press
CLEAR
to keep the message and return to idle mode, or
b. To continue, repeatedly press
MESSAGE RECALL
to view additional stored
messages.
6 – 4 Remote Access
Ve r s i o n 2 . 1
KEYBOARD USER MANUAL