31
Conductivity Calibration Report
This program lets you check the calibration factor of the conductivity electrode.
1.
Press MR key in the conductivity measurement mode, the display shows “LOC/P-01”.
2.
Press
or
key until the meter shows “ELE/P-02” (Electrode Diagnosis).
3.
Press ENTER key to confirm, the meter shows the last calibration date (Format: mm-dd).
4.
Press
key, the meter shows calibration point and calibration factor (e.g., K=0.998).
5.
After the browsing, press MEAS key to exit the current mode.
MR
MR
MR
……... Calibration Point
...…... Calibration Factor
EC910 Portable Multiparameter Water Quality Meter
