Ampcontrol gasguard, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 79

GASGUARD IS CONTROLLER Issue: R2, Date: 26/09/2011, CRN: 7502
Page 27
4.3.7 Set Zone 1 to Channel 1/High Fault Alarm
1. To modify ‘CH1 HF’ press the

key to enter
2. Use the

key to toggle between IN and NOT IN
3. To save, use the

key
4. To escape, use the

key
4.3.8 Set Voting Configuration (Refer to section 2.6.4 before setting voting functions)
1. To modify ‘Voting Value’ press the

key to enter
2. Use the

key to toggle between values 1 and 20
3. To save, use the

key
4. To escape, use the

key
4.4 Relay Configuration Menu
To view and modify individual Relay Configuration settings use the following procedure.
1. Once in the Configuration Menu, scroll down using the

key to position 11. Relay Configuration.
2. Press

to enter into sub-menu
4.4.1 Set Relay Status
1. To modify ‘Status’ press the

key to enter
2. Use the

key to toggle between ON and OFF
3. To save, use the

key
4. To escape, use the

key
4.4.2 Set Relay Type
1. To modify ‘RLY TYPE’ press the

key to enter
2. Use the

key to toggle between ND/NE
3. To save, use the

key
4. To escape, use the

key
4.4.3 Set Tag Name
1. To modify ‘TAG’ press the

key to enter
2. Use the

key to scroll through the alpha-numerals
3. Use the

key to move the cursor across to the next digit
4. To save, use the

key
5. To escape, use the

key
4.4.4 Set Relay 1 to Zone 1
1. To modify ‘ZN1’ press the

key to enter
2. Use the

key to toggle between IN and NOT IN
3. To save, use the

key
4. To escape, use the

key