Ampcontrol Pty Ltd
– ABN 28 000 915 542
GG2 DISPLAY USER MANUAL
GG2B023 Version 3
– JUNE/19
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 62 of 82
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
6.6.3.2 Display Logs
Figure 73: Display Log Example
The display log screen is similar to the detector logs screen
, and is titled “DISPLAY LOGS” (Refer to
Section 6.1.2 for details on navigating the menu). The log display structure is as follows:
a. Timestamp of the log YYYY-MM-DD HH:MM:SS
b. Log text
The display will store, at most, the 50 most recent logs. To select an older/newer log press down/up
respectively.
6.7 Display Maintenance
Peak Values Reset
Resetting of the recorded Last Peak Values (LPVs) can be done from the “RESET LAST PEAK
VALUES” screen, Refer to Section 6.1.2 for details on navigating the menu. On this screen, the current
LPVs are displayed. To reset the LPVs, press the centre segment of the magnetic keypad. The saving
changes screen will then be shown.
Figure 74: Reset Last Peak Values Screen
Factory Reset
The factory reset allows all settings to be cleared from the display, restoring it to an un-configured and
unused state with exception of the display logs and the display total runtime counter.
To perform a factory reset:
1.
Navigate the menu to the “FACTORY DEFAULT RESET” screen, refer to Section 6.1.2 for details
on navigating the menu.
2. The authorisation screen will be shown (refer to Section 6.1.2.1). Press the centre segment to
proceed.
