Page 35
FIREFINDER SERIES II
INSTALLATION,
COMMISSIONING
&
OPERATION
After scrolling through the groups and entering what I/O GROUPS will be turned
on by what module/s or device/s in a zone/s the operator is prompted to press
ENTER
to confirm the entries and / or changes.
8.8.2 Device Programming
Press
DEVICE:
Screen:
use these keys
to
EDIT
and move through wording &
These
keys to
MOVE
between fields i.e.: DESC & TYPE and next parameter
Enter the Loop and Sensor number then scroll through the following screens.
Press
or
Press
to
EDIT
or
to
DELETE
1.
EDIT LxSx DESCRIPTION AND TYPE STRING.
Edit then.
Press
e.g.:
DESC
Loop 1 Sensor 1
TYPE
SMOKE
2.
Allocate / Edit the Sensor to a Zone and set the device type then.
Press
e.g.: XP95 Photo, XP95 Heat etc-
3.
Set /Edit and display the Output Configurations or options then.
Press
e.g.: Latching, AVF, Non-latching etc
4.
Set / Edits and enables / disables the day/night settings then.
Press
5.
Allocates / Edits the Loop and Sensors Groups
.
After scrolling through the groups a prompt tells the operator to press ENTER to confirm the
changes.
8.8.3 Input Programming
Press
INPUT:
By following the screen prompts as above Edit or Delete an
INPUT
in a panel or a loop.
Screen: PROGRAM MENU SELECTING AN INPUT
IN A PANEL
ON A LOOP
I/O MODULE
LOOP
Select I/O MODULE
NO.
then ENTER
Select
LOOP NO
. then ENTER
INPUT
SENSOR
Select I/P NO then ENTER
Select
SENSOR NO
. then ENTER
EDIT
/
DELETE
DESC
INPUT
Select
INPUT NO
. then ENTER key
ALPHA KEYS ARE ACTIVE
EDIT
Lx Sx I/Px DESC STRING DESC
8.8.4 Output Programming
Press
OUTPUT:
By following the screen prompts as above Add, Edit or Delete an output in a panel or on a loop.
