Page 30
FIREFINDER SERIES II
INSTALLATION,
COMMISSIONING
&
OPERATION
8
Main Functions
LEVEL II MAIN FUNCTIONS
0: DATE 1: TIME 2: DAYNIGHT SETTINGS 3: LOGS
4: TESTS 5: I/O 6: ACCESS
SELECT NO:
LEVEL III MAIN FUNCTIONS
0: DATE 1: TIME 2: DAYNIGHT SETTINGS 3: LOGS
4: TESTS 5: I/O 6: PASSWORDS
SELECT NO:
Figure 39: The Level II & III Functions Menu
8.1
Setting the Function Date Facility
Select
FUNCTION
. A prompt will ask for a
PASSWORD
if the control panel is not currently active.
Using the keypad key in the Level 2 or 3 PASSWORD and press
ENTER
.
Press
To select the set
DATE SCREEN
. The prompt will ask for the date to be entered in this format,
DD/MM/YYYY
(e.g. 01/01/2011), key in and press
ENTER
. The screen will then return to the
MAIN
FUNCTIONS MENU
.
8.2
Setting the Function Time Facility
Press
Then in the following format key in the time,
HH:MM
(e.g. 16:00)
using the 24 hour mode
. Press
ENTER
and the screen will return to the
MAIN FUNCTIONS MENU
.
8.3
Setting the Function Daynight Facility
Press
The
DAY-NIGHT SETTINGS
screen will appear. Time entry is the same as set
ting the “Time”
facility
Press
To enter the
DAY ON
time then
ENTER
and,
To enter the
NIGHT ON
time then
ENTER
.
To ENABLE / DISABLE then
ENTER
.
For this Function to have control it must be
ENABLED
, press
Re-pressing
will toggle to
DISABLE
.
8.4
Function Logs Facility
Press
And the
EVENT LOG MENU
will be displayed.
The
LOGS MENU
allows the operator to select and view the events that have occurred of all;
Press:
ALARM,
FAULT
,
ISOLATE
,
SYSTEM
EVENT LOG MENU ( MAXIMUM SIZE = 1162 )
0: ALARM 1: FAULT 2: ISOLATE 3: SYSTEM
4: I/O
SELECT NO:
FAULT LOG 7/7 11/7/2005 14:56 05
SUPPLY FAULT
ST: EARTH FAULT
SELECT 0: PRINT ENTRY 1: SHOW OPTIONS
Figure 40: Logs Function Menu
&
Fault Log Selected
Once the type of log is selected, e.g. FAULT above, each entry can be viewed by stepping through
them using the
NEXT
and
PREVIOUS
keys
