Amity Technology Concord 2250, Руководство по эксплуатации для владельца

Страница: 11 / 49

11
Turning Radius Adjustment
There are adjustment holes on the cart that the steering rod can
be mounted. If the cart needs to turn sharper move the bolt
back. If the cart needs to turn wider move the bolt forward.
Turning Radius Adjustment
Steering Rod Mount
Steering Rod
Steering
Some carts have steerable axle options. The steerable axle
allows the cart to automatically follow the same path as the
implement towing the cart. The steering rod when attached to
the implement controls the cart’s steering. This can be adjusted
as needed to make the cart follow the tracks of the implement
towing the cart (see Turning Radius Adjustment). There is a
hydraulic cylinder in the cart steering which allows for manual
adjustment of the steering. This may be needed to side shift the
tracking path of the cart.
Attaching the Steering Rod
The steering rod (see Steering Rod) must be attached to the
implement to allow the cart to automatically steer with the imple-
ment. Attach the steering rod 15 inches to the side from the
hitch’s pivot.
To stop the cart from automatically steering, attach the steering
rod to the cart’s hitch as shown (see Steering Rod Mount). The
cart steering can still be adjusted with the hydraulic steering, but
will not automatically steer the cart. This will make the cart steer
the same as standard struts.
Caution
Make sure the hydraulic cylinder is completely full of oil
and there are no leaks before moving the cart to prevent
cylinder drift.