Amity Technology Concord 2250, Руководство по эксплуатации для владельца

Страница: 14 / 49

14
Blower
The air cart's blower system generates air pressure/fl ow to
carry the seed or other input products through the system to the
implement. The blower is driven by a hydraulic motor and two ¾”
hydraulic lines supply oil to the blower.
The only serviceable part on the blower is the shaft seal. This
may be replaced if the motor leaks at the shaft. Do not disassem-
ble the motor to replace the shaft seal. It is secured by a snap
ring and can be removed with a seal pick.
The blower and associated hydraulics
Caution
Be sure that the case drain line on the blower motor is not
connected to pressure. Damage to the shaft seal or motor will
result.
Warning
Do not under any circumstances disassemble the motor. It is
very diffi cult to assemble correctly and motor destruction will
result from running an incorrectly assembled motor.
The hydraulic drive motor mounts to the meter housing and
provide a direct drive of the meter shaft. The motor has a built-in
speed sensor to provide accurate meter speed feedback to the
electronics system.
Hydraulic drive Meter Drive Motor