Amico Apollo MS-SC, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 48

www.amico.com
7
Warnings
The bed should be installed, cleaned and used as described within this manual.
The bed should be operated by facility caregivers and facility-authorized service personnel only.
The maximum load capability of the bed including the patient surface is 550 lbs (250 kg). Exceeding load restrictions
could cause excessive wear to the parts and damage the bed, resulting in patient injury or death.
Entering and exiting the bed has to be done at the side with the siderails lowered completely.
Avoid sitting at the extreme ends of the bed (Fowler Section and Foot Section).
It is recommended not to use water or silicone surfaces in order not to exceed the maximum weight limit of 550 lbs
(250 kg).
For information on “Cleaning Procedures”, please see Page 17.
For information on “Electromagnetic Compatibility”, please see Pages 41-44.
Intended Use
The Apollo MS-SC bed is intended for patients in Acute-Care and L.T.A.C. hospitals. This Manual provides instructions
required for normal operation of the Apollo MS-SC bed from Amico Beds Corporation. Prior to operation of this bed, it is
important that this manual is read and ensure that all safety aspects contained in this manual are strictly adhered to.
Introduction
The Apollo MS-SC has been designed specifically to help caregivers assist patients in the Acute-Care and long-term acute
care. This bed features several features such as the integrated foot extender, removable headboard and footboard, and a
battery back-up system.
The motions of the Apollo MS-SC are achieved by independent DC electric motors through controls located on the
siderails of the bed allowing positions to be changed. The motors are also equipped with overheat protection.
This allow easier maneuverability during patient transport and to help avoid back injury in the caregivers. The battery
back-up system also provides peace of mind during transportation or unexpected power outages, allowing the bed
positions to be adjusted accordingly.