Amico Apollo MS-SC, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 48

www.amico.com
41
Electromagnetic Compatibility
Table A.1 – Electromagnetic Emissions
The Apollo Bed (B-AM1-400X) is intended for use in the electromagnetic environment specified below. The customer or user of
B-AM1-400X should assure that it is only used in such an environment.
Emission Test Compliance Electromagnetic Environment – Guidance
RF Emissions
CISPR11
Group 1
The Apollo Bed (B-AM1-400X) uses RF energy only for
its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in
nearby electronic equipment.
RF Emissions
CISPR11
Class A
The Apollo Bed (B-AM1-400X) is suitable for use in all
establishments other than domestic and those directly
connected to public low voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic Emission
IEC 61000-3-2
Not Applicable
Voltage Fluctuation/Flicker Emission
IEC 61000-3-3
Not Applicable
This product conforms to the EMC standard IEC 60601-1-2 (3rd Edition).
NOTE:
• This product needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided below.
• Mobile RF communications equipment can affect the product.
• The use of accessories and cables other than those supplied with the product as replacement parts, with
exception for cables sold by Amico Beds Corporation, may result in increased emission or decreased immunity
of the product.
• This product should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the product should be observed to verify normal operation in the configuration in which it will be
used.